Gun Restoration Colorado Springs CO

This page provides useful content and local businesses that give access to Gun Restoration in Colorado Springs, CO. You will find helpful, informative articles about Gun Restoration, including "One Way to Bring an Old Gun Back to Life". You will also find local businesses that provide the products or services that you are looking for. Please scroll down to find the local resources in Colorado Springs, CO that will answer all of your questions about Gun Restoration.

Gunsmithing Inc
(719) 632-3570
30 Buchanan Street
Colorado Springs, CO
Dick's Sporting Goods
(719) 264-1810
1710 Briar Gate Blvd
Colorado Springs, CO
Rackets and More
(719) 596-9633
1524 North Academy Boulevard
Colorado Springs, CO
Dan`s Auto Inc
(719) 635-2587
3210 Chelton Circle
Colorado Springs, CO
Genesis Automotive
(719) 633-0328
2444 Platte Place
Colorado Springs, CO
Dick's Sporting Goods
(719) 638-3400
First & Main Town Center
Colorado Springs, CO
Air Force Falcons Soccer Camp
2168 Field House Dr
US Air Force Academy, CO
Sports Authority
(719) 574-1400
Rustic Hills Shopping Mall, 1409 N. Academy Boulevard
Colorado Springs, CO
Golf Hitting Cage, Golf Trade-In Program, Ski-Snowboard Rentals & Jr. Season Lease, Ski-Snowboard/Bike Tech Shop, Firearms/Hunting, Hunting and Fishing Licenses, Delivery & Assembly
Monday - Saturday: 9:00am - 9:30pm
Sunday: 10:00am - 8:00pm
Holiday hours may vary.

Sunset Auto & Tire
(719) 328-1392
1504 North Circle Drive
Colorado Springs, CO
L & S Distributing
(719)578-1113, (719)578-9235
2827 East Platte Avenue
Colorado Springs, CO

One Way to Bring an Old Gun Back to Life

I have always looked for ways to save money and gain skills. I have the firearms basics covered so I rarely buy firearms these days.  But I do watch for bargains.  Sometimes a little TLC with simple tools will let you bring an old gun back to life without investing a lot of money.  One such find was a side by side 12 gauge marked “W. Richards” It is not from the fine English gun maker Wesley Richards, it is a cheap knock off copy probably made in Belgium about a hundred years ago.  What attracted me were the exposed hammers and the $75 price tag.  I had been looking for an exposed hammer side by side for some time.  New ones are priced in the $350 range. This example was clean, unpitted by rust inside or out.  The action was reasonably tight, the stock has been knocked around but is complete, and the hammers fired. The barrels had not been bulged or bent. But I did find a broken firing pin on the left side. I pointed that out to the owner who had it up for sale (who didn’t seem to know much about the piece) and brought it home for $50.
I took the old pins out with the aid of a small screw driver (just unscrew the retaining screw and push the pins back toward the hammers until they come out) and found that they were an unmatched pair.  At least one of the pins had already been replaced with an imperfect match.  The left one was broken off short, the right appeared the have a broken tip – probably from the action being closed with the firing pins extended
The pins were not straight pins such as could be replaced with a nail.  They are made from a narrow rod that strikes the primer attached to a larger cylinder which the hammer strikes to drive the whole pin forward.  The larger cylinder has a rectangular cut out that the tip of the retaining screw fits in preventing the pin from falling out of the shotgun.  The pins could be recreated easily enough but the cut out was not something easily accomplished with hand tools so I was now in the market for a pair of firing pins.
I looked online and came up empty.  But a local gunsmith thought he might have something that would fit.  A few minutes looking over his box of odd pins salvaged from innumerable repair projects turned up just one pin that almost matched.  It was the right shape but the diameter was too large.  He gave it to me gratis.  Yes, I’ll go back and do more business there for sure.  This is also a lesson in saving parts from other things.
Back at home I secured the replacement pin in my electric drill chuck and worked it carefully back and forth on its side against a flat file gradually decreasing the diameter of the cylinder.  When it fit the recess, I reversed the pin in the chuck and repeated the process reducing the diameter of the small rod until it too fit the firing pin hole.  Yippee!  I now had one replacement pin.
I then took the old pin with...

Click here to read the rest of this article from